Today, it is quite common to have a house with more than one television. And of course, it is wise to have all connected to the same cable provided by the Service Provider. Alternatively, with two networking equipment, different rooms can be served through a shared web signal.
Splitting the signals is a cost-effective way to get connected to one router. The result is not only in saving money but also changes the way signals are divided. Choosing the best coaxial cable splitter however is not a stimulating moment. The services that go into different directions end up truly changing the experiences at home. This guide will help you find the top product for your needs.
When shopping for a splitter for the first-time things turn out to be difficult. Their main aspects that you must be considered to make this process a little overwhelming. Some include:
Devices are often designed uniquely to handle different numbers of TVs. As usual, it is essential to determine the actual measurements to make things more straightforward. The calculation of its capacity is often measured in MHz and GHz.
One point of reference is that ordinary television cables have approximately 1 GHz of signal strength. It is key to check the exact bandwidth level required to buy the right splitter. Without doing this then the signal will end up being slow and even cause more problems.
While most of the splitters have a capacity of 1GHz, there are some that provide higher bandwidth. The units that meet the standards however generally come at a higher cost. Being expensive means reordering another one in the future will not be necessary. In the end, getting the connection speed needed will be easy.
All the splitters have a specific number of splits that the product provides. The market offers a big range of options but the most common one is the two splits. Getting the model with higher numbers saves so many hassles. Remember it is not a good idea to be lured to buying the maximum splits possible. Always try to reduce this to the ones needed. The reason is that high splits mean the fewer signal is passed along.
The simplest and most available cable splitters simply divide the signal into two. This turnout ends up being problematic for televisions that need higher signal strengths. The truth is that for any splitter to be considered as a high-quality type it must have an in-built signal amplifier. Checking this out is worth it because of it undoubted that at some point this splitter will be used on quite demanding electronics.
Another useful feature and option that should accompany a splitter is a combiner. This function is often used when attempting to add more signals to the current cable. Basically it is mandatory for mounted TV's. Even though this part is not a must when looking for a simple splitter, it becomes useful when it is available.
If you are looking for a highspeed internet connection then BAMF 2-Way Coax is all you need. This splitter is easy to use and will never compromise on its effectiveness. Of course, it ensures that your home gets all the reliability that a cable provides is enjoyed. Thus, it is worth noting that this device is very simple and easy to install. All you need is to simply plug, and have it play in no minutes.
In case you need to replace an old one or install a brand new one, buying this will not cause any frustration. Not only is this cable splitter an extra cable, but also it positively affects the bandwidth speeds. Thanks to its ability to lose a small amount of signal, of about 3.5db on every output port. This turnout improves its performance as well.
This splitter model is appreciated to be among the best 2 way cable splitters because it fully reduces any potential issues that are likely to plague its operations. It has a frequency bandwidth of 5-2400 MHz that all connected devices to work optimally. Its interior circuit board makes it more durable.Pros Cons
The Tolmnnts coaxial is one 2-way cable splitter that is trusted to work quite well. This device is designed and well packed with features that make it effectively work. What is more, it can stand excellently the test of time. The reason is that it has a Zinc die-cast casing with a nickel plating. This construction makes it of high quality, more stable, rust and weather resistant. Granted, it will have a long-life span and serviceability.
It supports a frequency of up to 2.5GHz which provides a superior electric circuit. Because it is digital it has high internet speeds and cable connections to multiple devices. For instance, you can split networks to CATV, Antenna System, Internet, MoCA Configurations and Satellite TV.
This model minimizes signal loss. Thanks to the included circuit board inside. This makes it have high shielding configuration thus better performance. During use, it also lowers the noise produced and increases sign quality. Either modems and other devices have reduced packet loss.
This package comes with one Coaxial Splitter, two Screws, two Screws Plug, and a User Manual. This ensures is it easy to use and install. All the ports pass power thus making the satellite connection faster.Pros Cons
Another product that remains among the best of its class is the Cable Matters cable splitter. This splitter is not only luxurious but also it works perfectly after installation. It has a precise construction with a housing cast from zinc.
This means it is radiofrequency protected to cut on insertion losses. The exterior surface is gold plated to balance splits of inbound signals into multiple outward ones. It will work well on VCR, CATV, cable box, satellite receiver, or antenna. This product comes in options including 2, 3, 4 or 5-way.
All the types offer the same amount of quality and versatility that fits all your needs. It's gold plating ensures that the device stays completely free from corrosion. That way there is no longer any worries about durability. These features made it best 2 way coax splitter in the market.
The price of this product is reasonable because it is a 2-pack. This means there is one spare unit that can be used also for replacement on other devices. Also, it comes with a MoCA adapter to cut on the loss of pictures, sound, or signal quality.Pros Cons
If you are looking to transmit coaxial signals to multiple devices conveniently, then the Neoteck coax splitter can help you achieve that. Designed as a 6-way product it comes equipped with a specially made screw with an F-Type. This means multiple devices including for VCR, TV antennas, computers, modems, and cable boxes can be connected at the same time. This feature allows it to work well in all the components while optimizing signals and the internet. That way connectivity runs uninterrupted signal during use.
This splitter gives enhanced performances thus it is very convenient for use. This makes a good unit for someone who looks to split signals and uniformly distribute the signals. It is well-known for its ability to perfectly match NTL, Virgin Media, Dream box, Tele west, Starview, and Eurovox. Its high shielding construction pulls down digital noise and increases signal quality.
The package comes together with one 6-way high-grade coax cable with a bandwidth of 5 to 2500MHz. This provides high cable and internet speeds when connected even to multiple devices with one coaxial signal. So, you can pick the best 6 way coax splitter undoubtedly.Pros Cons
Are you seeking a cable that can be connected to multiple devices and still distribute the signal evenly? Then the design of BAMF 4-Way Coax Cable Splitter will provide the strength needed to pass signals from every output port. Basically, BAMP manufactured the best 4 way coax splitter with fast performance and speeds. Packed with all the necessary features it offers better experiences and excellent bi-di output to the users. That means it will work well with the internet, Satellite, MoCA, TV, and CATV.
While its ports ensure improved performance, it records about 7dB loss. The connections process is quite easy as it allows power to pass through every port. This model works well even for outside environments. Why? It is completely all-weather resistant thus the circuit board elements can stay out for some time without malfunctioning. Besides this part guarantees durability, reliability, and high connectivity speeds.
With a frequency ranging from 5 to 2300 MHz, it ensures your home receives no interferences. Installing it is quite easy and in turn, provides optimized digital signals thanks to the structure which is high shielding. This minimizes digital noise, increases signal quality, lowers packet loss on modems, and other devices.Pros Cons
Connect multiple devices with the help of the BAMF 8-Way Coax Cable Splitter. Known as a premium signal splitting unit this can divide coaxial cable signals. This separation often goes into different signals. Thus, it is ideal for homeowners with the necessity for extra output. Of course, with this, you can enjoy using many displays from a single source.
This model ensures the users experience optimized speeds and performance. The reason is that it contains eight output ports that are power passing. Also, this product has a radiofrequency of between 5to2300MHz to ensure uninterrupted signals. The splitter will work great for CATV, Satellite, and MoCa.
Its circuit board placed inside for improved reliability and durability. The parts will not leave you full of worries in any weather. Its design resists even the most adverse environments like water. It records minimal loss of signal of just 11db from every output port. These features made it the best 8 way cable splitter huge customer satisfaction.
When connected its structure not only minimizes digital noise but also makes better the signal quality. Thanks to its high shielding ability it as well reduces packet loss on modems and other devices.Pros Cons
It is not difficult any more if your connections are in different rooms and the source device is found in another space. The ANTOP 8-ways Splitter will make splitting possible. This model splits a single inbound coaxial sign like satellites and HD antennas into eight outbound signals.
It has a precision die-cast made from zinc with a chassis of 18K that is gold-plated. This ensures optimal signal transfer, corrosion fighting, and consistent connectivity. Besides its compact size makes it have a lightweight that does not compromise on functionality. The structure is also high shielding for lower insertion loss and high return losses.
All its ports are DC Power Passing thus enabling power from every output. This passes currents to the input source or in reverse directions. Thus, every of its satellite receiver supplies LNB power and the amplified outside antennas or header amplifiers get powered by the inside power supplying devices. However, it is wise to take care to ensure the receiver's input cannot get damaged by power from any external receiver. The opposite powering shield is offered with many systems and receivers.Pros Cons
If you need a high-quality coaxial cable splitter that can improve your experience then the BAMF 3-Way Coax Cable Splitter will work best for you. This product is designed with end-users in mind with excellent bi-di output. What is more, it covers well all device users to provide service connections.
With its frequency bandwidth between 5 to 2400MHz, it provides optimal performances. It can be used with phones, TVs, cable internets, satellite TVs or other antenna systems. It also works well particularly on MoCA systems and is compatible with any other size of coaxial cable. Modems and other devices will work with minimal packet loss.
It features a water-resistant circuitry board that provides reliable, durable, and high-speed internet and cable connection. Together with the enhanced performance the ports simply show about 5.5dB of loss. The ports are power passing to deliver an easy connection. Also, it will work well with cameras and amplifiers. These features make it best 3 way coaxial cable splitter in the market.
Its structure is high shielding that reduces digital noise and enhances signal quality. The housing is resistant to harsh weather and so keeps the elements free from defects.Pros Cons
Coaxial Cable splitters need to be good amplifiers and with the ability to distribute signals evenly. This Extreme Coax Cable Splitter is a perfect example of a premium grade product. Indeed, it is mostly designed for 2-way multimedia use. It is suitable for the application on both TV sets and desktops. If it is connected to a coaxial cable it allows you to install the devices without troubles.
This splitter has the capacity to raise signal strength to about 3.5db for every port. Thus, it perfectly splits the connection between the devices. However, it can excellently work when directly connected to ensures that the signals within the home are not affected. Moreover, the effectiveness is felt when it is used together with a router. That way it maintains the internet speeds without experiencing any drops.
The manufacturer designed it for high-performance since it supports frequencies of up to 1GHz. From the same coaxial signal, excellent speeds will be realized for cable TV and internet connections to other multiple devices. The features help in hooking up even routers from the same outlet signals source.Pros Cons
Are you seeking a cable that can connect to more than one device? Then GE 2-way digital splitter is all you need because it evenly distributes digital signals. This splitter is designed as a multipurpose unit as when it is connected it allows for the installation of more TVs. It suits use with HD signals, satellites, internet modems, cable TVs, amplified Antennas, and any other coaxial device.
It distributes a reliable frequency range of up to 2. 5 GHz. This connectivity comes with a great speed between two outputs. Even better, one digital signal is split into two devices that are balanced. All the ports allow for power to pass through.
The connectors are gold plated to allow for maximum connectivity and conductivity. The unit also remains corrosion-free for a long time thus reducing worries over dealing with rust. It is compatible with RG6 and RG59 coax cables. Another combination of video component is likely when it is fitted with the F type ports.
One ideal thing about this product is that it comes backed up with a lifetime warranty. This guarantees satisfaction when you consider this purchase.Pros Cons
Choosing the best splitter for TV services is unfavorably key. This helps in ensuring that the signals will pass through unhindered. When you decide to enhance the broadband frequency, this issue of cost becomes equally important.
High-bandwidth models are certainly costly unlike the ones with lower capability. For you to get uninterrupted, excellent, and many output signals, then consider the best one available in the market. Always check your home's needs and purchase accordingly. Keep in mind that prices vary with models and the included features.
As it is known a coaxial cable splitter functions as an input or output device. That means it takes in one input and produces multiple signals. The number of frequencies depends on the connections you need, and the model of splitter purchased.
Generally, the options range between 2-way up to 16-way. Different from the old types, the construction of the current cable splitters incorporates technology. This aids in retaining signal strength to prevent the loss of signal. This action results in the premium picture quality and superior broadcasting experiences on your devices.
The best model certainly depends on what is needed out of the device. For instance, split ratio, frequency range, and stop-bands. A superior splitter should provide unity expansion and powerful amplification as intended.
As a result, insertion loss is eliminated, and the ratio of signal-to-noise remains unchanged after and before splitting. If you can buy the ones that have the right features and material, then you will get the best functionality. But generally, get something with an adequate number of output ports to increase the power ratio.
A splitter is a device that takes one input and sends it to two outputs. In the case of coaxial cable, a splitter does take a single input and split it into two separate outputs. It might seem as though this would result in a signal loss, but splitting actually has no effect on signal strength or quality if done properly.
In fact, cables used for television use must be impedance matched, which means that the cables have very specific resistances built into them. Coaxial cable is not 100% efficient, meaning that some of the signals within are lost before they reach their destination. This is why splitters exist, to make up for all of those losses so you don't lose any signal strength through the split.
As for what a splitter is made of, most are simple pieces of coaxial cable with another length of the same type on the opposite end. The connections between them are usually standard F-connectors, which you can find at your local hardware store or Radio Shack if needed.
Coaxial cables must be properly sized to match their use. A way around this would be to use an amplifier, which takes one input and boosts it before sending it along to multiple outputs. If you're splitting up a TV or satellite receiver's signal, an amp will give you better results than just using two separate splitters - but again, only if they are designed for that purpose.
Most cable splitters are designed for splitting cable that's carrying the same signal coming from more than one source. For example, digital cable is sent using multiple channels - some on channel 3 and others using channel 4, but they're the same quality of signal. If you have your main receiver hooked up to two TVs (one in your living room and another in the bedroom), you can hook each TV up directly with its own line of coaxial cable instead of running both through a single splitter. This avoids any loss of signal strength due to extra splitting.
You may run into problems if you decide that both TVs should use the exact same channel or package (i.e., start watching channel 3 on both TVs or subscribe to all of your channels at once). In those cases, you will need a splitter that's designed for splitting the same signal as it comes from two different sources. If this is the case, simply hook your main receiver up to one side and your cable box (for digital cable) or satellite dish (if you have it) up to the other side. Your TVs can be hooked directly into either side of the splitter and they should receive exactly what's coming through both sides without any loss.
As for how many splits are safe before loss becomes a factor - if you're using good quality equipment with proper impedance matching, there shouldn't be any negative effects until about six or seven splits. To avoid any complications, use two splitters back to back - they're designed for the job and will be much sturdier than just hooking up a single splitter several times.
If done properly, splitting your cable signal won't have any effect on the quality of your picture or sound. You can also refer to our article series on splitters to learn more about this subject.
Coaxial cable splitters allow a single coaxial cable to be shared between two devices. For example, if you have a Cable TV line and wanted to watch it on another TV in your house while the family was watching the other TV in the living room, you would need 3 things:
Functions of splitters:
Types of Coaxial Cable Splitters: 1) Pass-through - a simple splitter that does not alter the input signal in any way. 2) Combiner - a splitter that allows signals to be combined onto one line. 3) Tap - a splitter that splits the input into two outputs, usually with some signal loss between the split. All of these types are discussed below in greater detail.
The pass-through coaxial cable splitter is simple and inexpensive, but it does not allow you to combine signals or split the signal to multiple locations. These are commonly used for Cable TV drops if you have two TV's near each other, but want to run a simple coaxial cable from the wall outlet to your basement and attic.
Pass-through splitters look like this:
That is a 2-way pass-through splitter. Coaxial cables are plugged into the input side, and then each output will provide an identical signal to each coaxial cable coming out of it. These work well when you just need to share a Cable TV line with 2 TVs in your house that are not more than about 100 feet apart (as any additional split of the signal beyond 4 outputs is not done very well).
These splitters will usually have one F-connector on the input side, allowing one coaxial cable to be inserted, and two F-connectors allowing for two coaxial cables to be inserted on the output side.
Pass-through splitters also come in 1 GHz versions that act similarly except they can handle splitting signals up to 1 GHz. The pass-through 1 GHz splitters are rated for CATV, Digital Cable TV (DVB), off-air UHF/VHF reception, public safety communications, wireless video & security cameras.
The combiner coaxial cable splitter has the same idea as a pass-through splitter, but it allows you to combine signals onto one line instead of splitting them into two lines. A basic combiner will look like this:
This is a 3 way combiner. The coaxial cables are plugged into the input side and then come together onto one output port which splits the signal again so that each output now has the identical signal coming out of it - just like a pass through splitter.
A more complex combiner will look something like this:
This is a 6 way combiner. If you compare the input with the output in the above picture, they are identical. A 6-way combiner can allow for up to 6 different signals to be combined into one signal before it reaches your TV or satellite dish receiver (usually an even number of outputs are used at all times, i.e. 2-, 4-, 6-. etc.).
A 3-way combiner functions similarly but provides less loss than a 2-way combiner.
These splitters will usually have one F-connector on the input side, allowing coaxial cable to be inserted there, and several F-connectors on the output side allowing for coaxial cable to be inserted there.
The tap is the most complicated type of coaxial cable splitter, but it provides you with more flexibility when splitting signals. These are rated for CATV, Digital Cable TV (DVB), off-air UHF/VHF reception, public safety communications, wireless video & security cameras. A basic tap looks like this:
This picture shows a 2-way tap which means that one signal is tapped and split into two identical signals before reaching your television or satellite dish receiver. This is ideal for situations where you want to send one Cable TV or satellite dish signal to your living room and bedroom TVs without having to run a long cable from the wall outlet.
A more complex tap will look something like this:
This picture shows a 4-way tap which allows for up to four signals to be combined at once off of one cable line before reaching your TV or satellite dish receiver.
The drawback of splitters and taps is that they may degrade the signal you are sending to your television (or receiving from your satellite dish). As described above, splitting the signal may make it weaker. These devices do not usually introduce any noise into the signal, but they can cause loss because some energy is lost every time the signal is split. This loss depends on how many times the signal has been split; 2-way splitters lose about 3 dB (4 times as much power), while 4-way splitters lose about 1 dB. The loss from a tap is difficult to calculate, but it depends on the signal strength coming from your cable line and how many connections are made after the tap.
Coaxial cable splitters and taps should not be used if you want to send a signal over long distances - these devices will introduce too much loss into the signals. There are special amplifiers that can be placed at frequent intervals along a coaxial cable line which do not have these problems of degradation, as they actually boost or amplify signals as they travel along them - allowing for distribution of satellite dish or Cable TV signals over longer distances without needing an incredibly thick coaxial cable.
GE Digital 2-Way Coaxial Cable Splitter, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with - Walmart, Etsy, eBay
BAMF 2 Way Coaxial Cable Splitter, Bi-Directional Coax MoCA 5-2300MHz, RG6 Compatible, - Walmart, Etsy, eBay
GE Digital 4-Way Coaxial Cable Splitter, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with - Walmart, Etsy, eBay
NEWCARE Digital 2-Way Coaxial Cable Splitter 5-2400MHz, RG6 Compatible, Work with - Walmart, Etsy, eBay
KOSTONA F-Type RG6 Coax Cable Splitter Combiner Adapter Connecter for TV Video Antenna - Walmart, Etsy, eBay
Extreme 2 Way HD Digital 1Ghz High Performance Coax Cable Splitter BDS102H - Walmart, Etsy, Ebay
SUPERBAT F-Type Splitter Cable F Male to F Dual Female Coax Splitter Cable V-Type F Type - Walmart, Etsy, Ebay
Antronix CMC2002H-A 2-Way Horizontal Splitter -3.5dB 5-1002 MHz High Performance for Coax - Walmart, Etsy, eBay
4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with - Walmart, Etsy, Ebay
Cable Matters 2-Pack Bi-Directional 2.4 Ghz 2 Way Coaxial Cable Splitter for STB TV, - Walmart, Etsy, eBay
Nowadays signal splitting has become common. And it is quite better to find the best coaxial cable splitter that serves the purpose. Never get tempted to choose the highest available split option. But it is advisable to reduce the number to suit your needs. Of course, more split numbers reduce the strength of the signal.
When shopping, ensure you know the type of device existing. This way is it easy to understand the strength it requires. The reason is that it becomes too problematic if a device requires higher amounts of signal. The best quality model usually comes with an inbuilt amplifier. Therefore, it is ideal to always check what other users say before buying one.