How To Check Shutter Count Of Your Camera

0
123
how to check shutter count in your camera

Like any other machinery, the system of operation of cameras has limits. All its moving parts quit performing excellently after some time. Undoubtedly, the shutter is no exception since it does too much work. Even worse, without this taking photo would be impossible.

At this point, it means that maintenance is necessary for a better photography adventure. This ensures that such beautiful devices remain in top conditions for the next years and sessions. The process is like the cars that need repair after cruising for several miles based on models.

Cameras experience this through shutter lifetime. This can also be the estimated number of times the shutter works before it starts hitting the fan. The releases are unique to everybody and brand, but it ranges from 30,000 to thousands. This article highlights how to find your shutter actuations to enable you to buy the best secondhand camera.

What is a Shutter Count?

Sometimes known as actuations, it refers to the process by which the shutter of a digital camera opens and closes during use. Thus, this information is important when buying a second-hand unit since it tells the total number of photos taken. This provides an indication of the extent to which the device has been used. The good thing is that it not only shows how much it is worn as it can be seen in context.

Cameras have an automated closing mechanism that covers and exposes the sensor. Every time a photograph is taken the shutter tool goes to and fro. The rate of movement across is precise as it depends on the speed selected.

Complications During Use

The shutter is an essential part of the inside operations of a DSLR. While counts are a representation of how much this device has been used, there are other ways of telling the type of treatment it has endured. Chips, dents, and extreme wear are enough indications of endurance to a rough life and harsh care. The other indications are more vital than actuations after all even with extended care, it might not make a good bet.

Like other mechanical implements, the experiences this part receives eventually cause failure. And it can be the first piece to fall off. Why? It moves many times and is very fragile and quite hard to reach if it is necessary to repair it. Thus, it is important to know when the camera can fail. Because this should not happen if you are in the middle of a photo shoot.

Unfortunately, this is quite complicated. Not all DSLRs record the number of times the shutter gets fired. And some that do this have its recordings rarely done in an easily reachable way. This, in turn, could mean that a specialist or a reliable software is required to directly read it from the camera internal memory.

How To Find Shutter Counts In Your Camera?

There are many ways to determine the total counts that a camera has. All the procedures rely on accessing the device, images created, or even both.

1. Check Manually the EXIF Information

Luckily most of the manufacturers insert the actuations in the information produced to allow you to examine all the recent photos. Thus, with some devices, you can see the number of clicks that are existing. The details are added to enable you to figure out its life expectancy. Start by visiting the company’s website and lookup for the model to find the information about its shutter.

It is worth noting that the process may yield no results. If this is the case, then punch the model ‘s name into search engines and include shutter life expectancy. Because machinery may not all the time follow the promises given, it is wise to search further. Peruse through photography settings to read through reviews about this brand and see whether the cycle matches your model.

Basically, all the information about the shutter count will be in the photo’s EXIF data. The metadata collects data about speed, ISO, aperture, time and even the date.

2. Confirm from CameraShutterCount.com website

Another excellent way for finding out a camera’s shutter count is by uploading a picture taken. EXIF data is what makes CameraShutterCount.com interface to handily work across most camera models. The process of extracting the details is quite simple. All you need is to choose and then upload some pictures on this site and allow it to read the information. Then get not only the shutter counts but also the devices’ life cycle based on what the manufacturer estimated.

Check the end of its main page to find out if this model is registered and an already working unit. Even if this type is not listed it pays so much to consider uploading a photo just as a trial. The fact is that the method is suitable for more than 100 different models. The reason is that all that is shown on the page are all tested and proven.

3. Try Using JPEG Format

It is normal to fear or become uncomfortable when uploading pictures to third parties. So, switching to JPEG not only makes it easy and fast to access all the EXIF information. To cut down on the worries, it is wise to download programs that aid in reading and finding the number of actuations.

Unfortunately, many default photo viewers just display basic and generic data. That means you need a software that shows the full expanse. For instance, use EXIFTool since it is available for use on both Windows and Mac. When it is installed, open its command prompt and then proceed to pull the file. Some numbers will pop up to allow you to see the shutter actuation.

4. Download EXIF viewer

For you to view the exclusive EXIF data from recorded files, using an image viewer that will not strip anything from it. Unluckily, almost many available programs only show generic data that several individuals use and end up overlooking the others. Instead of correctly reading what is displayed on the files and then analyze its results, the people only look for common identifiers contained by the file and present them when something is found. If nothing is accessible, it remains blank. But to cut on the total blank things to a minimum, only generic information is provided. This is highly or not as consistent across many camera producers. Because such types of photo EXIF viewers will not help in finding the number of shutter counts, it is necessary to use unpopular forms of data viewing programs. For instance, Opanda’s IExif.

Reading the Results of the Shutter Count

Keep in mind though that at some point it will likely stop functioning properly and so will need maintenance. One ideal way to tell the time this is necessary is to become aware of the recent shutter actuations. Knowing the real actuations is like understanding the number of miles that a car has covered.

With this information you know the expectancy, you can tell how the real camera is fairing on. And that gives an opportunity for you to respond accordingly. The good thing, however, is that the device will never die even after hitting its expectancy. In case you will be buying a used unit and the mockup image shared by the seller tells it has 500 cycles then know that the camera is barely used. If this shows 500,000 cycles, it is evident that the unit has some serious mileages.

The extent of the miles heavily depends on the estimates given by the manufacturer and the averages reported by users and expert photographers. Generally, quickly hitting up Google will help you search the model, brand, and shutter life cycle for official records.

What is the number of Shutter Counts You Should Expect?

One good thing is that most of the camera manufacturers operate with allot of transparency regarding the failure of gears after some time of usage. The number of actuations can be found as described above. It is also safe to take it up that the best DSLR shutter can be as good as new with a minimum of 50,000 cycles. Other than that professional level cameras have a rating of more than 100,000 shutter cycles. Even better most of the devices can stand well with more than 100k actuations during life expectancy. At this point, it will still work well without any problem.

Finally, there are many key things that must be considered when shopping for a used digital camera. The most useful one is the number of shutters counts that the DSLR device has experienced. This is essential because all the devices have a shelf life, and this could be shorter or longer.

In simpler words, the shutter counts, or actuation refers to the total photographs a camera has captured. To prevent mishaps or malfunctioning during shooting due to exceeded expectancy, it is vital to know how to find the count. At this point, this helpful article will hopefully come to your aid.

LEAVE A REPLY